Home / Laundry / Laundry Guides & Advice

How to Reduce Vibration and Noise from Your Integrated Washer

If your integrated washing machine sounds more like a jet engine than a laundry appliance, you’re not alone. Excessive vibration and noise can make laundry time stressful and even damage your kitchen fittings over time. In this guide, we’ll walk you through effective ways to reduce washing machine noise and keep your appliance running quietly and smoothly.

Why Is Your Integrated Washer Vibrating

There are several reasons why your integrated washer might be vibrating or shaking during cycles:

Unbalanced laundry loads
Poor installation or uneven flooring
Transit bolts not removed (in new machines)
Worn shock absorbers or bearings
Loose cupboard or unit panels

How to Reduce Washing Machine Vibration and Noise

1. Check the Installation

Your washer must sit flat on the floor. Use a spirit level to check all sides. Adjust the machine’s feet until it is stable and no longer rocks.

2. Remove Transit Bolts

Brand-new machines come with transit bolts to secure the drum during transport. These must be removed before use, or they’ll cause loud banging and excessive movement.

3. Use Anti-Vibration Pads or Mats

Placing anti-vibration pads or a rubber mat beneath the washer helps absorb vibrations. These are especially useful on wooden or tiled floors.

4. Secure Cabinet Panels

If the surrounding cabinet panels or plinths are loose, they may rattle loudly during the spin cycle. Secure them with brackets or foam tape to minimise the noise.

5. Balance Your Laundry Load

Washing a single heavy item can cause your machine to become unbalanced. Always mix heavy and light items and distribute clothing evenly inside the drum.

6. Use a Slower Spin Speed

Many modern machines let you reduce the spin speed. A slower spin might take a little longer to dry clothes, but it can dramatically cut down on vibration and noise.

7. Inspect the Drum and Internal Parts

If you’ve tried everything and the machine is still noisy, it could be a sign of worn shock absorbers or drum bearings. At this point, it’s worth calling a professional.

Extra Tips for a Quieter Wash

Run the washer during the day to avoid night-time disturbances
Close cupboard doors to contain sound
Add soundproof foam to the back or sides of the housing unit

When to Call a Professional

If the machine continues to vibrate excessively or make strange noises even after all adjustments, it may need servicing. Look out for:

Grinding or thudding sounds
Visible wear on the drum or door seal
Vibration that causes the appliance to shift position

Conclusion

Reducing vibration and noise from your integrated washer can be as simple as levelling the machine or using anti-vibration pads. For ongoing issues, inspect for internal wear or consult a qualified technician. A quiet washer means a calmer home and a longer-lasting appliance.

Looking for a quieter integrated washer? Check out our latest models designed for smoother, more stable operation.

Frequently Asked Questions

Violent shaking is usually caused by an unbalanced load, uneven flooring, or transit bolts left in place. Make sure the machine is level and properly installed.

Yes, anti-vibration mats and rubber feet help absorb movement and reduce the transmission of noise, especially on hard or wooden floors.

Some noise is normal, but excessive banging, shaking, or squeaking can indicate a problem with installation, balance, or internal components.

Use a spirit level across the top of the machine front to back and side to side. Adjust the legs until the washer sits evenly and doesn’t wobble.

Yes, if the door or hinge is loose, it can rattle and amplify vibration sounds. Check and tighten all fixings around the fascia and hinges.

Absolutely. Overloading causes imbalance during spin cycles. Stick to the recommended load capacity for smoother operation and better results.